...
Search
Close this search box.

Our Products

To create the optimal Drilling Fluid Formulation, various factors must be considered. The native soil exerts the greatest influence on the selection of drilling fluid mixture. Once the native soil has been properly identified and characterized, the most suited Drilling Fluid mix shall be recommended.

Unleashing the Power of our specially designed, Site-Specific Mud Formulations

At the core of our product portfolio lie two key components: Bentonite and Polymer based Drilling Fluids. In some technically challenging cases, we also work with modified hybrid Mix Design Slurries incorporating both Bentonite & Polymer additives. Bentonite, a natural clay mineral, and Polymers, synthetic additives, are the building blocks of our specialty drilling fluids. Combined, they create fluid formulations with remarkable properties that optimize drilling operations.

Bentonite Mud System

The most economical and widely used Fluid Formulation is using a naturally occurring Bentonite Mud as a Drilling Fluid medium. The Rheological Properties & formation of an impermeable Mud cake during excavation helps make it a widely accepted Fluid Formulation especially in loose / fractured Ground Formations.

Polymer Mud System

Among the most recently used Fluid Formulations- a Polymer mud system- either Synthetic or Cellulosic may be proposed in situations where use of a Bentonite system may be deemed unsuitable together with its obvious technical advantages- such as its improved Foundation performance eg. in Load Testing of B-Piles, and its Environmental and Operational Benefits eg. minimal Site Equipment needed.

Bentonite + Polymer Mixed Mud System

When necessary, a Bentonite or a Polymer Mud System may be recommended to be modified into a Mixed Mud System to suit the Technical requirements of a particular given Site. Expert Supervision and Technical Support is needed to manage such a Mud System.

TYpe of fresh water fluid formulations

Products

FLUIDSOL & FLUIDSOL 40

Premium Grade High Yield Drilling Bentonites
FLUIDSOL range of Premium grade High Yield Bentonites are designed to provide Fast Hydration at low Dosages. Excellent Rheological &Fluid Loss properties together with low Sand Content properties make it a preferred Product for Geotechnical Applications such as Horizontal Directional Drilling, Micro-Tunnelling PipeJacking, Special Foundations among others. The FLUISOL Product Range exceed API and EN1536/1538 Specifications.

POLYBLUE 60 & POLYBLUE 60 VHM Grade Extra

High Viscosity Synthetic Viscosifiers
POLYBLUE 60 is a range of multi-functional long chain, anionic drilling polymers available in both Powder and Liquid form. Properties such as rapid field mixing, instant viscosity development, and clay and shale inhibition improve Drilling efficiency both in Vertical & Horizintal Drilling Operations such as Deep Foundations, Horizontal Directional Drilling, Water well & Geotechnical Drilling.

POLYBLUE 60 - PVL

Liquid Synthetic Viscosifier
POLYBLUE 60- PVL is a highly efficient viscosifying, Liquid long-chain Synthetic Anionic Drilling Polymer that improves borehole stability & efficiency especially in reactive Ground Conditions. It can function both as a stand-alone Drilling Fluid, and can also be used in combination with other Additives as part of the advanced S3 MATRIX System to enhance bore Stability, especially when drilling in loose or unconsolidated Ground Conditions in market segments such as Horizontal Directional Drilling, Micro Tunnelling- Pipe Jacking, Deep Foundations etc.

POLYMATRIX HV

Viscosifier and Fluid Loss Reducer
POLYMATRIX HV is a premium, refined grade cellulosic Viscosifier and Fluid loss reducer for all water based muds. POLYMATRIX HV can be used as an additive to stabilize Bentonite Slurries in contaminated Grounds or as a Stand-Alone Polymer Slurry in reactive Groud Conditions. Applications include Horizontal Directional Drilling ,Deep Foundations, Microtunnelling & Water well Drilling.

POLYMATRIX LV

Fluid Loss Reducer
POLYMATRIX LV is a refined grade Low Viscosity cellulosic Viscosifier for all water based muds. POLYMATRIX LV helps reduce Fluid Loss with minimal increase in Slurry Viscosity. Applications include Horizontal Directional Drilling, Deep Foundations, Microtunnelling & Water well Drilling.

POLYCEL HV

Biodegradable High Viscosity Additive & Fluid Loss control Agent
POLYCEL HV is a premium grade, High Viscosity CarboxyMethyl cellulosic polymer that functions as a highly efficient Viscosifier & Fluid loss Control Agent for all water-based muds. It is easy to use and dispersible in Water-based Mud Systems. It helps stabilize Drilling Mud especially in Saline Ground Conditions. Applications include Water Well Drilling, Special Foundations, Horizontal Directional Drilling, Micro-Tunneling Pipe Jacking etc.

FLUIDSPERSE

Liquid synthetic Thinner
FLUIDSPERSE is a formulation of synthetic polymers in a pale yellow to colorless viscous liquid form. FLUIDSPERSE functions as an all-purpose water-soluble dispersant and Thinner. Its deflocculating properties especially in reactive Clays, makes FLUIDSPERSE an efficient additive in Bentonite based drilling Formulations.

GUAR GUM EHV

Premium High Viscosity Drilling Polymer
GUAR GUM EHV is a premium grade, high Viscosity, carbohydrate polymer that functions as a highly efficient Viscosfying Agent and provides optimum results at much low dosages compared to standard grades. It provides rapid viscosity development for fracturing fluid applicationsprovides rapid Viscosity development for Water based Fluid Applications such as Geothermal/ Water well Drilling, Soil Investigation Works, Special Foundations, Horizontal Directional Drilling, Oil & Gas etc.